Strip Mask

Strip Mask for ITO

This product is suitable for applications such as a protective coating material of ITO surface(Film & Glass) temporarily.
It can be used to reduce the damage to ITO surface and Glass surface caused by scratches and dust and to prevent the volatile substance which is generated in the curing process of silver paste and insulation paste from adhering to the ITO surface.

nothing a residual substance on surface, not pollutes substrate, vinyl chloride material
Products color component Viscosity (at25℃) Drying Condition
#503F(EX) Blue    1 250~450dPa・s 130℃×10min
not pollutes substrate, non-use of vinyl chloride material
Products color component Viscosity (at25℃) Drying Condition
#626B-5 Blue    1 600~1000dPa・s 150℃×10min
UV curing type stripmask in which used urethane-acrylic resin as binder.
Products color component Viscosity(at25℃) Drying Condition
#UV-300□ Milky-white(T)Blue(B) 1 100~200dPa・s 1000mj/cm2
(Metal halide lamp)
500mj/cm2
(High pressure mercury lamp)

※Please use in original viscosity. There is no setup of the thinner.

PRODUCTS GUIDE

Insulating Paste

  • Heat Curing Solder resist for FPC
  • Heat Curing Solder resist for FPC
  • photo-solder-resist-for-fpc
  • Photo solder Resist for FPC

Conductive Paste

  • PTF Conductive Paste
  • Copper Paste
  • PTF Resistor Paste

Strippable Mask

  • Strip Mask for ITO
  • Heat-resistant Mask

Flux

  • Soldering Flux

Adhensives

  • Adhensives&Conductive adhesive

Others

  • Etching Resist
  • Via-Plugging Paste

Asahi Chemical Research Laboratory Co., Ltd.

656 Utsuki-cho,Hachioji,Tokyo 192-0024

Contact us