Strip Mask

Heat-resistant Mask

Strip Mask Heat-resistant type
STRIP MASK is peelable masking ink used for covering unnecessary parts temporary in soldering PWB usable also as masking material in plating process.

Long time commercial production,easy-peel,Vinyl chloride resin
Products Color component Viscosity(at 25℃)
(VT-04)
Halogen Free Drying Condition
#503B-SH Blue 1component 400~600dPa・s 130℃×10min
high thermo-stability,easily peeled off even after Pb free Reflow process ,PVC-free
Products Color component Viscosity(at 25℃)
(VT-04)
Halogen Free Drying Condition
#801B-R Blue 1component 500~1500dPa・s support 130℃×20~30 min

※Since this paste is one-component type without solvent, thicker film formulation is possible.

PRODUCTS GUIDE

Insulating Paste

  • Heat Curing Solder resist for FPC
  • Heat Curing Solder resist for FPC
  • photo-solder-resist-for-fpc
  • Photo solder Resist for FPC

Conductive Paste

  • PTF Conductive Paste
  • Copper Paste
  • PTF Resistor Paste

Strippable Mask

  • Strip Mask for ITO
  • Heat-resistant Mask

Flux

  • Soldering Flux

Adhensives

  • Adhensives&Conductive adhesive

Others

  • Etching Resist
  • Via-Plugging Paste

Asahi Chemical Research Laboratory Co., Ltd.

656 Utsuki-cho,Hachioji,Tokyo 192-0024

Contact us